Discovery - University of Dundee - Online Publications

Library & Learning Centre

Ex vivo surface and mechanical properties of coated orthodontic archwires

Ex vivo surface and mechanical properties of coated orthodontic archwires

Research output: Contribution to journalArticle

View graph of relations

Authors

  • Firas Elayyan
  • Nick Silikas
  • David Bearn (Lead / Corresponding author)

Research units

Info

Original languageEnglish
Pages661-667
Number of pages7
JournalEuropean Journal of Orthodontics
Journal publication dateDec 2008
Journal number6
Volume30
DOIs
StatePublished

Abstract

This study examined the mechanical and physical properties of retrieved coated nickel-titanium (NiTi) archwires compared with unused samples. Ultraesthetic (TM) 0.016 inch coated archwires (G&H® Wire Company) were investigated. Ten as-received wires were subjected to a three-point bending test using conventional and self-ligating bracket systems. Surface roughness of the coating was measured with a contact stylus profilometer. Optical and scanning electron microscopes were used to assess surface topography. Ten archwires were used in vivo for a period of between 4 and 6 weeks. Retrieved archwires were subjected to the same tests. The percentage of the remaining coating was calculated using digital photography. Coated archwires were used in vivo for a mean period of 33 days. Differences between the mean values of the as-received and retrieved archwires were determined using t-tests.

In the three-point bending test, with conventional elastomeric ligation, retrieved wires produced a lower unloading force (P < 0.001). Both retrieved and as-received coated archwires produced zero values of unloading force when deflected for 4 mm. When tested using a self-ligating bracket system, retrieved and as-received coated archwires produced the same amount of force (P > 0.05). With surface profilometry, all measured roughness parameters (except R-sm) had greater surface roughness for the retrieved coated archwires (P < 0.05). Under microscopy, retrieved coated archwires showed discolouration, ditching, and delamination. Only 75 per cent of the coating was present in retrieved coated archwires.

Retrieved coated archwires produced lower unloading force values than as-received coated archwires with conventional ligation. Surface roughness of coated archwires increased after use. Coated archwires have a low aesthetic value, with 25 per cent of the coating lost within 33 days in vivo.

Documents

Library & Learning Centre

Contact | Accessibility | Policy