Abstract
Background: Diabetes mellitus (DM) significantly impairs fracture healing, necessitating reliable animal models to study diabetic fracture repair mechanisms and therapeutic interventions. This study aimed to develop and comprehensively validate a standardized three-point bending system for inducing precise, reproducible mid-shaft transverse femoral fractures in rats, addressing existing methodological gaps of insufficient reproducibility and detailed calibration in previous models. Methods: A custom-designed three-point bending fracture induction system was developed using AutoCAD software based on the original principle introduced by Einhorn et al. (1984). After manufacturing and calibration, the system was validated first using 22 cadaveric rat femurs and subsequently applied to live rats (n = 44), including diabetic (streptozotocin-induced, n = 22) and non-diabetic animals (n = 22). Fracture induction reproducibility was assessed through radiographic, histologic and mechanic analysis. Additionally, statistical analysis was conducted using GraphPad Prism 9 software. Coefficients of variation (CV) for fracture-healing parameters (callus diameter, calcification ratio, maximum bending force at re-fracture) were calculated and compared statistically with similar parameters from previously published rat femoral fracture studies. Results: Cadaveric validation confirmed that the optimal blade travel distance, set as half the femoral diameter, consistently produced standardized transverse fractures without comminution. A significant correlation between body weight and femoral diameter (Femoral diameter = 1.0276 ln [Body weight] − 1.349) allowed accurate preoperative determination of optimal blade travel distance. Live animal testing demonstrated consistent fracture patterns, stable intramedullary pin fixation, and no complications during surgical procedures. Statistical analysis revealed significantly lower coefficients of variation for healing parameters in this study compared to previously published models (p < 0.05). Histological analysis indicated the fracture type was transverse. Callus was found around fracture site. Conclusion: Our validated three-point bending system significantly enhances reproducibility, consistency, and methodological rigor in animal fracture research. This standardized model provides an ideal foundation for future preclinical studies investigating diabetic fracture healing mechanisms and potential therapeutic interventions.
| Original language | English |
|---|---|
| Article number | 328 |
| Number of pages | 9 |
| Journal | Journal of Orthopaedic Surgery and Research |
| Volume | 20 |
| Issue number | 1 |
| DOIs | |
| Publication status | Published - 1 Apr 2025 |
Keywords
- Diabetic fracture model
- In vivo fracture induction
- Rat femur
- STZ diabetes model
- Three-point bending system
ASJC Scopus subject areas
- Surgery
- Orthopedics and Sports Medicine
Access to Document
- Published final version
© The Author(s) 2025. Open Access This article is licensed under a Creative Commons Attribution-Non Commercial-No Derivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.