Contact angles of diiodomethane on silicon-doped diamond-like carbon coatings in electrolyte solutions

Konstantin B. Borisenko, Evangelos A. Evangelou, Qi Zhao, Eric W. Abel

    Research output: Contribution to journalArticlepeer-review

    9 Citations (Scopus)

    Abstract

    The influence of surrounding electrolyte type and concentration on the contact angle of hydrophobic diiodomethane on silicon-doped diamond-like carbon (DLC) coatings was examined to provide insight into how the presence of electrolytes in the solution influences adhesion of hydrophobic material to doped DLC surfaces. There was a small but statistically significant increase of contact angle with increasing electrolyte concentration over the range from 0 to approximately 0.01 M, after which the contact angle was virtually unaffected by further increase in the concentration of electrolyte. It was shown that CaCl2 has a stronger influence on the change of the contact angle than NaCl, and that an increase in Si content in the DLC coatings increased the change in the contact angle of diiodomethane for all types of electrolyte. These observations suggest that the adhesion to the Si-doped DLC surfaces is reduced by addition of the electrolytes to the surrounding solvent. This could be explained by increased ion adsorption on the DLC surface with increase in silicon doping, causing the surfaces to be more hydrophilic. (c) 2008 Elsevier Inc. All rights reserved.

    Original languageEnglish
    Pages (from-to)329-332
    Number of pages4
    JournalJournal of Colloid and Interface Science
    Volume326
    Issue number2
    DOIs
    Publication statusPublished - 15 Oct 2008

    Keywords

    • adhesion
    • ion-solid interactions
    • amorphous surfaces
    • coatings
    • wetting
    • surface energy
    • AQUEOUS-ELECTROLYTES
    • SURFACE
    • MONOLAYERS
    • ADHESION
    • ENERGY
    • WATER
    • DROP
    • SALT

    Fingerprint

    Dive into the research topics of 'Contact angles of diiodomethane on silicon-doped diamond-like carbon coatings in electrolyte solutions'. Together they form a unique fingerprint.

    Cite this