Enhanced Passivation Layer by Cr Diffusion of 301 Stainless Steel Facilitated by SMAT

TY - JOUR

T1 - Enhanced Passivation Layer by Cr Diffusion of 301 Stainless Steel Facilitated by SMAT

AU - Olugbade, Temitope Olumide

AU - Liu, Chang

AU - Lu, Jian

N1 - Copyright © 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

PY - 2019/8

Y1 - 2019/8

N2 - AISI 301 stainless steel (SS) is known for its high strength and hardness but tends to be less corrosion resistant for many applications. Several attempts have been made in the past to investigate its corrosion behavior by different methods. However, current knowledge is insufficient on its corrosion resistance when subjected to surface treatment. In this work, a new route to enhance the corrosion resistance of nanostructured 301 SS using surface mechanical attrition treatment (SMAT) method is described. SMAT improves the mechanical properties of 301 SS by the formation of a nanostructure layer on the material surface. Compared to the as-received 316 and 304 SS counterparts, the present nanostructured 301 SS exhibits an improved corrosion behavior by a lower corrosion current density (1.308 mA/cm2), higher corrosion potential (−0.071 V), higher phase angle and impedance, better charge-transfer resistance, and Cr content. The improved corrosion resistance can be attributed to the ability of SMAT to facilitate the move of Cr on the surface, which forms a stronger passivation layer with a new mechanism of passivation that may save a lot of noble metals.

AB - AISI 301 stainless steel (SS) is known for its high strength and hardness but tends to be less corrosion resistant for many applications. Several attempts have been made in the past to investigate its corrosion behavior by different methods. However, current knowledge is insufficient on its corrosion resistance when subjected to surface treatment. In this work, a new route to enhance the corrosion resistance of nanostructured 301 SS using surface mechanical attrition treatment (SMAT) method is described. SMAT improves the mechanical properties of 301 SS by the formation of a nanostructure layer on the material surface. Compared to the as-received 316 and 304 SS counterparts, the present nanostructured 301 SS exhibits an improved corrosion behavior by a lower corrosion current density (1.308 mA/cm2), higher corrosion potential (−0.071 V), higher phase angle and impedance, better charge-transfer resistance, and Cr content. The improved corrosion resistance can be attributed to the ability of SMAT to facilitate the move of Cr on the surface, which forms a stronger passivation layer with a new mechanism of passivation that may save a lot of noble metals.

KW - corrosion behavior

KW - nanostructure

KW - passivation

KW - SMAT

KW - 301 SS

UR - https://www.scopus.com/pages/publications/85065538319

U2 - 10.1002/adem.201900125

DO - 10.1002/adem.201900125

M3 - Article

SN - 1527-2648

VL - 21

JO - Advanced Engineering Materials

JF - Advanced Engineering Materials

IS - 8

M1 - 1900125

ER -