Experimental and numerical investigation of screw anchors in large crack width

In predicting the capacity of screw anchors under static tensile loading, the Concrete Capacity (CC) method is the state-of-the-art prediction model which covers concrete cone capacities in uncracked and cracked concrete up to 0.3 mm crack width. However, in seismic applications, anchors may be subjected to large crack widths of up to 0.8 mm. With large crack width, the behaviour of small-sized (typically 6 mm) screw anchors has not been studied. In this study, experimental investigations were conducted for a total of 29 anchors in uncracked and cracked concrete with large crack widths up to 0.8 mm. The experimental results showed that the load-carrying capacity of screw anchors significantly dropped resulting in a reduction factor of 0.13–0.47 for cracked concrete with 0.8 mm crack width (significantly lower than 0.7 assumed by the CC method for a crack width of up to 0.3 mm). This paper focused on developing modelling technique for predicting the performance of screw anchors in cracked concrete with a crack width of up to 0.8 mm since screw anchor in cracked concrete has not been studied using finite element analysis. Three-dimensional finite element models were developed for screw anchors in uncracked and cracked concrete and validated by the experimental results. Further, parametric analysis showed that dilation angle and shape factor are the two most influencing parameters among other of the concrete damage plasticity model.