Modelling alkali-silica reaction from µ-CT images – role of particle size and w/c ratio

An experimental programme was conducted to observe, non-destructively, the influence of aggregate particle size and low water/cement (w/c) ratios on alkali–silica reaction (ASR) in concrete using micro-computed tomography scanning. The results were analysed using a model developed as part of a previous study. ASR expansion and cracking was observed to increase to strain levels of around 0.010 with a decrease in particle diameter up to a ‘pessimum’ diameter of 1–2 mm. Below the pessimum diameter, expansion was low: around 0.001 strain. Analysis using the previously developed model clearly illustrated a transition from above the pessimum diameter, where ASR was the main process occurring, to below this size, where a pozzolanic reaction dominated. ASR expansion increased with a decrease in the w/c ratio, reaching strains of around 0.015. The model indicated that this is fundamentally a result of extended periods of restraint of ASR gel around aggregates, ultimately ending in much greater expansion when fracture eventually occurred. Additionally, cracking of aggregate coincided with an accelerated rate of expansion in mixes with w/c ratios below 0.6.