RETRACTED: Retraction Note: 3D printing of surface characterisation and finite element analysis improvement of PEEK-HAP-GO in bone implant

Bankole I. Oladapo; S. Abolfazl Zahedi; Seng Chong; Francis T. Omigbodun; Idowu O. Malachi

doi:10.1007/s00170-021-07434-3

RETRACTED: Retraction Note: 3D printing of surface characterisation and finite element analysis improvement of PEEK-HAP-GO in bone implant

Bankole I. Oladapo (Lead / Corresponding author)
, S. Abolfazl Zahedi
, Seng Chong
, Francis T. Omigbodun
, Idowu O. Malachi

Research output: Contribution to journal › Article › peer-review

Abstract

Retracted Note to: The International Journal of Advanced Manufacturing Technology (2020) 106:829–841

https://doi.org/10.1007/s00170-019-04618-w

The Editor-in-Chief has retracted this article due to substantial similarities with a previously published article by different authors [1].

Author Oladapo agrees to this retraction. Authors Zahedi, Chong, Omigbodun and Malachi have not responded to any correspondence from the editor or publisher about this retraction.

Original language	English
Pages (from-to)	3361
Number of pages	1
Journal	The International Journal of Advanced Manufacturing Technology
Volume	115
Early online date	21 Jun 2021
DOIs	https://doi.org/10.1007/s00170-021-07434-3
Publication status	Published - Aug 2021

Access to Document

10.1007/s00170-021-07434-3

Cite this

@article{1878b475296d47bda0f80e1d31b78102,

title = "RETRACTED: Retraction Note: 3D printing of surface characterisation and finite element analysis improvement of PEEK-HAP-GO in bone implant",

abstract = "Retracted Note to: The International Journal of Advanced Manufacturing Technology (2020) 106:829{\textendash}841 https://doi.org/10.1007/s00170-019-04618-w The Editor-in-Chief has retracted this article due to substantial similarities with a previously published article by different authors [1]. Author Oladapo agrees to this retraction. Authors Zahedi, Chong, Omigbodun and Malachi have not responded to any correspondence from the editor or publisher about this retraction.",

author = "Oladapo, \{Bankole I.\} and Zahedi, \{S. Abolfazl\} and Seng Chong and Omigbodun, \{Francis T.\} and Malachi, \{Idowu O.\}",

year = "2021",

month = aug,

doi = "10.1007/s00170-021-07434-3",

language = "English",

volume = "115",

pages = "3361",

journal = "The International Journal of Advanced Manufacturing Technology",

issn = "0268-3768",

publisher = "Springer London",

}

RETRACTED: Retraction Note: 3D printing of surface characterisation and finite element analysis improvement of PEEK-HAP-GO in bone implant. / Oladapo, Bankole I. (Lead / Corresponding author); Zahedi, S. Abolfazl; Chong, Seng et al.
In: The International Journal of Advanced Manufacturing Technology, Vol. 115, 08.2021, p. 3361.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - RETRACTED: Retraction Note: 3D printing of surface characterisation and finite element analysis improvement of PEEK-HAP-GO in bone implant

AU - Oladapo, Bankole I.

AU - Zahedi, S. Abolfazl

AU - Chong, Seng

AU - Omigbodun, Francis T.

AU - Malachi, Idowu O.

PY - 2021/8

Y1 - 2021/8

N2 - Retracted Note to: The International Journal of Advanced Manufacturing Technology (2020) 106:829–841 https://doi.org/10.1007/s00170-019-04618-w The Editor-in-Chief has retracted this article due to substantial similarities with a previously published article by different authors [1]. Author Oladapo agrees to this retraction. Authors Zahedi, Chong, Omigbodun and Malachi have not responded to any correspondence from the editor or publisher about this retraction.

AB - Retracted Note to: The International Journal of Advanced Manufacturing Technology (2020) 106:829–841 https://doi.org/10.1007/s00170-019-04618-w The Editor-in-Chief has retracted this article due to substantial similarities with a previously published article by different authors [1]. Author Oladapo agrees to this retraction. Authors Zahedi, Chong, Omigbodun and Malachi have not responded to any correspondence from the editor or publisher about this retraction.

UR - https://www.scopus.com/pages/publications/85075915221

U2 - 10.1007/s00170-021-07434-3

DO - 10.1007/s00170-021-07434-3

M3 - Article

SN - 0268-3768

VL - 115

SP - 3361

JO - The International Journal of Advanced Manufacturing Technology

JF - The International Journal of Advanced Manufacturing Technology

ER -

RETRACTED: Retraction Note: 3D printing of surface characterisation and finite element analysis improvement of PEEK-HAP-GO in bone implant

Abstract

Access to Document

Other files and links

Fingerprint

RETRACTED: 3D printing of surface characterisation and finite element analysis improvement of PEEK-HAP-GO in bone implant

Cite this